A vinyl car wrap is a great way to temporarily change a vehicle’s appearance. If you’re a savvy small business owner, you can use a vinyl car wrap for custom advertising to attract new customers and increase your brand visibility in a crowded marketplace.
How do I know when to remove a car wrap?
How long do vehicle wraps last?
The lifespan of a wrap runs from 5 to 7 years—depending on how well you take care of it and variables like weather and where the vehicle is stored. Maybe you inherited a car with a vinyl wrap or you already have a wrap on your work truck but it’s starting to look a little sad with abrasions, lifted edges, and weathering. If that’s the case, it’s time to start thinking about car wrap removal. After all, the longer you leave it on, the harder the wrap will be to remove.
Below, we’ll go into the DIY steps for how to remove car wrap as well as how to make your new vinyl wrap stand out from the competition. Keep reading for a comprehensive overview or skip to the section you want to know more about.
Vinyl car wrap general information and tips
Before we deep dive into the steps of vinyl removal, you should be aware of the factors that impact removal difficulty.
For example, the longer vinyl wrap has been on, the harder it will be to remove. By the same token, it’s more likely there will be adhesive residue left behind the longer the wrap has been on the car.
Vinyl becomes brittle over time so if a vinyl wrap has been on a vehicle for say, 10 years, it’s going to be a labor-intensive process to remove all of the chips and pieces.
On the other hand, if the vinyl wrap is under four years old, there’s a good chance you can make it a weekend DIY project instead of taking it to a car wrap removal service. More than anything, the removal process will demand a lot of patience.
Another element that will affect removal is the actual type of vinyl used. Calendared or off-brand vinyl will make the wrap removal process more unpredictable and possibly more expensive. It’s definitely a case of “you get what you pay for.”
The big-name vinyl companies charge a premium because their research and development processes are much more robust. These companies have an incentive to protect both their brand name reputation as well as perceived and actual value in the marketplace. Companies that hawk cheaper vinyl are more concerned about selling high volume.
Before you commit to removing the entire vinyl yourself, try to remove a small portion first with a vinyl wrap removal solvent. If it chips off in small flakes, it might be best to leave the job up to professionals. But if you find that the vinyl comes off relatively easily once heat is applied, you’re in good shape to do it yourself.
What not to do when removing a vinyl car wrap
Don’t remove your car wrap when it’s cold out, in direct sunlight, or during other adverse weather conditions. Not only will this make you miserable, but it’ll also complicate the removal process unnecessarily.
How to remove a vinyl car wrap
Okay, now with all this information in mind, it’s time to get down to it. Here are the steps you should take to remove your vinyl car wrap.
Step 1: Heat the vinyl
Heat the vinyl according to vinyl manufacturer specifications (generally 65 degrees and up) using a heat gun or another heat source. Make sure the heat gun isn’t in one spot for too long—you don’t want the vinyl to bubble or start to burn.
Required tools and materials:
Heat gun: the heat needed to remove the vinyl will depend on the vinyl manufacturer.
Step 2: Start with a corner
Peel a corner or edge of the material and slowly pull at a 45-degree angle. This ensures that the vinyl doesn’t tear or break apart. Whatever you do, don’t yank at the vinyl. Yanking could cause the vinyl to pull up with the laminate left behind, which is incredibly difficult to remove. The hood is a good place to start but if you want to tackle the harder stuff first, go for the vinyl around the bumpers.
Primer isn’t needed to properly install a vinyl wrap but some companies use it to speed up the process. If a primer has been used, you’ll have a harder time removing the adhesive left behind. Unfortunately, a primer can also mean that paint may be scratched or partially damaged during the removal process. You can try using plastic razor blades, which are designed to slide under vinyl and decals to pry them up.
Step 3: Stay consistent
Keep your pulling pressure, angle, and speed consistent while you’re peeling off the vinyl. Take extra care around deeply contoured areas of your car.
Step 4: Use vinyl wrap removal solvent to remove adhesive residue
There may be some leftover vinyl adhesive residue. If this is the case, you can use a vinyl wrap removal solvent that’ll help break it down. You may want to check with the vinyl manufacturer to find out brands that are safe to use with your particular vinyl wrap.
Here are some tools and professional-grade vinyl wrap removal solvents that can safely and more effectively speed up the process. Other tools and materials:
Tools and materials:
Step 5: Start your next design
Plan out your next wrap paying special attention to legibility and brand visibility.
How to care for a new vinyl car wrap
The company 3M, one of the largest vinyl companies in the business, offers a few tips for the after-care of your new vinyl car wrap…
This isn’t the time to neglect your car simply because it now has a protective layer. Just like paint, a vinyl wrap can degrade if it’s not taken care of properly. Whenever there is apparent dirt or other debris on the vinyl, make sure that you clean it off immediately. Where possible, use a spray of water to rinse dirt and road particles. For spot cleaning stains, use a wet, gentle detergent and a microfiber towel.
It’s recommended you avoid wax and other finishing products on top of the vinyl.
Automated car washes
Although you can take a vinyl-wrapped car through a car wash, it’s best if it’s touched less. The scrub brushes can be too abrasive on the wrap and cause it to tear or peel at the edges. Be mindful of this before pulling into any old car wash. The safest option is to simply handwash your vehicle so you can clean it without the risk of scratches and lifting.
If you leave your new vinyl wrapped vehicle in the sun, they can quickly degrade in quality. You’ll see weathering in the hood, trunk lid, and roof if left out in the elements for too long. If you can, the ideal place to store a vinyl wrapped car is a garage or a shaded area. Dew or rain can contain acidic pollutants so make sure it’s covered during adverse weather.
If you don’t have a garage, you might want to protect your car wrap with a cover.
The car wrap removal process requires patience, the right tools, and a little elbow grease. Before committing to a new vinyl wrap design, make sure to upload the before and after of your wrap in our Housecall Pro Facebook Group to show off and maybe get some good advice on what to do next!